|
|
|
|
|
Learn to solder with easy-to-follow instructions! Ideal for hobbyists and education institutes.
Each kit comes with easy-to-follow pictorial instructions and a 'how to solder and desolder' guide.
Features
- 42 LEDs (extras included)
- Sound Indicator
- Push-button time selection
- Rotate to reset (tiltsensor)
- 2xAAA battery power (not Incl.)
- Microprocessor technology
- On/Off switch
Kit Contents
| Component Name | Value | Qty | Designator | Important Info |
| LED 5mm | 5mm | 42 | LED1 ... LED42 | Watch for polarity. Long leg is positive (+) |
| Mini Push Button | 6mm x 6mm | 2 | KEY1, KEY2 | No Polarity |
| Pin Header | 2.54mm 1x8 | 2 | P1, P2 | No Polarity |
| Female Header | 2.54mm 1x8 | 2 | U1, U3 | No Polarity |
| Resistors | 330 ohms | 7 | R1 ... R7 | No Polarity |
| Resistors | 1K ohms | 3 | R8, R9, R10 | No Polarity |
| Buzzer | 3V | 1 | BUZZER1 | Watch the polarity |
| Tilt Sensor | SW-52D | 1 | SW1 | No Polarity |
| On/Off Switch | 3.7mm x 8.5mm | 1 | SW2 | No polarity but pay attention to placement position |
| Integrated Circuit (IC) | STC15W204S | 1 | U1 | Match the ‘notch’ on the silkscreen to the notch on the IC |
| Battery Clip | AAA | 4 | BT1, BT2, BT3, BT4 | Pay attention to the placement direction |
| Capacitor | 100nF | 1 | C1 | No Polarity |
| Desoldering Braid | 6" long (2.5mm width) | 1 | n/a | Use to remove solder when correcting mistakes |
| Stock Code | Product Name |
| DIY-001 | Hourglass DIY Solder Kit |