|
|
The SG90 Plastic Gear Servo Motor is an low cost servo in a compact package. It is commonly used in light-weight radio controlled planes, helicopters, drones and robotics.
This is the perfect servo motor to use in microcontroller mechatronic projects where limited space is available, there isn't a need for large amounts of torque and servo accuracy is required.
Features of the SG90CR 360 Micro Servo:
- 360 degree rotation
- It can lift up to 1.5kg of weight positioned 1cm from the center of the shaft
- Small size
- Every motor is inspected and the basic operation verified
Package includes:
- 1 - SG90CR Servo motor with attached 250mm control cable
- 3 - arms/horns for various interface applications
- Screws for mounting arms to the servo and mounting the servo to your project
Motor Connections:
The attached cable has a 3-pin female connector that is mated with a standard 0.1″ male header.
1×3 Female Connector
- Brown = Ground
- Red = 5V
- Orange = PWM Signal
| Dimensions | 22.9*12.2*30mm |
| Product Weight | 9g |
| Output Shaft Style | / |
| Angle Rotation | 360 degree |
| Voltage Range | 4.8~6 Volts |
| No-Load Speed(6.0V) | 0.1 sec/60° |
| No-Load Speed(4.8V) | 0.12sec/60° |
| Stall Torque(6.0V) | 1.5kg.cm |
| Stall Torque(4.8V) | 1.3kg.cm |
| Max PWM Signal Range(Standard) | |
| Travel per μs(out of box) | / |
| Max Travel(out of box) | / |
| Pulse Amplitude | 3~5V |
| Operating Temperature | (-)10 to +50 degree C |
| Stall Current - (6.0V) | 700mA |
| Idle Current - no-load(6.0V) | 4mA |
| Direction w/Increasing PWM Signal | anticlockwise |
| Deadband Width | 5usec |
| Motor Type | / |
| Potentiometer Drive | / |
| Freeback Style | / |
| Output Shaft Support | / |
| Gear Type | Plastic |
| Gear Material | Plastic |
| Wire Length | 250mm |
| Wire Gauge | JR |
| Stock Code | Product Name |
| LS-SG90CR | SG90CR Plastic Gear Servo - 360 |