print

OSEPP™ 101 Arduino Basic Starter Kit

Arduino Basics

  • Discover Arduino through EASY and FUN lessons
  • Step-by-step instructions with diagrams
  • No prior electronics knowledge required
  • Kit comes with everything you need to build your own:

• Volt Meter
• LED Game
• Buzzer Circuit and play melody
• INCLUDES the OSEPP UNO R3 PLUS board!

 

Tutorial 1: Loading the First Sketch

Tutorial 2: Controlling Digital Outputs

Tutorial 3: Using Digital Input

Tutorial 4: An LED Game

Tutorial 5: Building Voltage Meter

Tutorial 6: Using Buzzer to Play a Melody

Tutorial 7: Counting Down with a 7 Segment LED

Tutorial 8: Powering the UNO R3 PLUS Using Batteries

 

Arduino Starter Kit Includes:

OSEPP UNO R3 Plus 1
6 feet USB type A to mini-B 1
Tact push switch 6mm x 6mm – through hole 2
DIP switch 4 position – through hole 1
1Kohm potentiometer (variable resistor) – long pins 1
10Kohm potentiometer (variable resistor) – long pins 1
330 ohm axial resistor, 1/2W, 5% 20
1 kohm axial resistor, 1/2W, 5% 5
10kohm axial resistor, 1/2W, 5% 5
LED through hole – Red, 8.7mm height, ~2V drop, ~10-20mA 2
LED through hole – Yellow,  8.7mm height, ~2V drop, ~10-20mA 2
LED through hole – Green,  8.7mm height, ~2V drop, ~10-20mA 2
LED through hole – White,  8.7mm height, ~2V drop, ~10-20mA 2
LED through hole – Blue,  8.7mm height, ~2V drop, ~10-20mA 2
Two digits 7-segment LED – RED 2
Buzzer, 5Vo-p 1
NPN transistor 2
Breadboard – 30 columns x 14 rows (include 2 VCC and 2 GND) 1
6 inches male-to-male jumper wires (red) 10
6 inches male-to-male jumper wires (black) 10
6 inches male-to-male jumper wires (white) 10
6 inches male-to-male jumper wires (grey) 10
6 inches male-to-male jumper wires (blue) 10
4x AA battery enclosure with DC power jack and ON/OFF switch, cable length 4″ 1
2cm x 2cm x 3mm thick double side tape 2
Information sheet – Arduino UNO diagram + basic electronic theory 1
Kit container 1

 

OSEPP UNO R3 Plus Specifications

 

Microcontroller ATmega328P
Clock Speed 16 MHz
Flash Memory 32 KB
SRAM 2 KB
EEPROM 1 KB
Operating Voltage 5V
Input Voltage 6-12 V
Digital I/O Pin Count 14 (including 6 for PWM output)
Analog Input Pin Count 6

 

Other Connections Mini-USBICSP for ATmega2560DC power connector4-pin latchable Molex connector
Dimensions 2.95 x 2.13 x 0.61 inches (75.0 x 54.0 x 15.5 mm)
Power Source USB or external DC power supply

Availability:

Stock Code Product Name
ARD-101 OSEPP 101 Arduino Basic Starter Kit